![]() I would erase the flash of the unused controllers and keep them for the power injection.Īll in all I can save 6 controllers and hopefully the show will run smooth after this. Same with the minitree-minitreestar-candycane combination, there I will try to controll 3 of each bundle with one controller. Next I would use one controller for five arcs instead of to, so I save 3 controllers. I made some tests, then reflashed the controllers with ESpixelstick FW and tested again.ġ2+ Controllers: About 6fps (especially after adding the two controllers for the mega tree)Īfter reflashing, I also rearranged the univers IDs and channels, because I saw that I made may mistakes (e.g 2 universes for the arcs, but 1 would be sufficient) Pixelstick displays images one line of pixels at a time and can increment through a series of images over multiple exposures on your camera. I've been a bit unclear With the data sending devices "connected directly to the router", I meant hard wired. Pixelstick by Bitbanger is an image reader that projects small images through a series of LED lights arranged in a straight line. The outputs setting for the pixelstick are working - as the toy soldier works perfect when testing that sequence. Thanks for every tip and greetings from Germany! FPP is also setup to control 1 esPixelStick for the animated toy soldier wireframe that uses an xlight sequence. In my Xlights setup there some mistakes with the universe IDs and channel counts, but it should not be a problem if there are unused channels within one universe. Maybe reducing the controller count would help? I could combine 5 arches to one (83 LEDs/arch => 415 LEDs/total) should be controllable with 25fps. The mega tree as second device is completely shifted after that, so I changed back. ![]() I tired to switch do DDP instead of E.1.31 but it only works for the first prop. I know that the wireless performance is not the best, but I thought that it would be possible to control that 2500 LEDs. Now I am looking for tips, how to improve the data performance on the system. To reduce each controllers load, I thought it would be a great idea to use more controllers (e.g two arches with one controller). I don't see the option in 3.2, or on the list of things added in 4.0. atmanryu: Sequence commission done on Livestream for. I built the Navy coro prop from Boscoyo for my dad that I'm lighting using an ESPixelstick and I thought I had seen last year there were plans to update the ESPixelstick to be able to run sequences on startup instead of requiring FPP or something similar. I use self-designed ESP8266 WLED based controllers for the props (with WS2812 LEDs). echographapp: Light painting with Pixelstick by Bitbanger Pixelstick is a. Sadly the show doesn't run smoothly, is jerky and has lags After months of planning and building my first light show, I made the first test of all components installed in the garden.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |